CLEAN, DAMAGE-FREE REMOVAL

Window Tint Removal in Greenville, SC

Professional tint removal that gets every trace of old film and adhesive off your glass — no scratches, no residue, no damage to defroster lines. Ready for fresh tint or crystal-clear glass.

⚡ Quick Answer

Window tint removal in Greenville costs $75–$250 depending on how many windows and how badly the old film has degraded. Bubbling, purpling, or peeling tint means the adhesive has broken down and requires careful steaming and scraping. DIY removal risks scratching glass and destroying rear defroster lines. Professional removal takes 1–3 hours and leaves glass perfectly clean.

When Does Window Tint Need to Be Removed?

Window tint doesn’t last forever. Cheap dyed films can start degrading in as little as 2–3 years, especially in the South Carolina sun. Even quality films eventually reach end of life after 10–15 years. The telltale signs are bubbling (the adhesive releasing from the glass), purpling (the dye breaking down from UV exposure), and peeling at the edges. Beyond cosmetic issues, degraded tint can impair visibility and may not pass inspection in some states.

Old window tint covered in bubbles on a rear window

Can I just peel off the old tint myself?

You can try, but it usually goes badly. Old tint film separates into two layers when it degrades — the dyed layer peels off relatively easily, but the adhesive layer stays bonded to the glass. That adhesive is incredibly stubborn and requires specific solvents and technique to remove without scratching. On rear windows, aggressive scraping destroys the thin defroster lines embedded in the glass. Replacing those defroster lines costs $150–$400 at a glass shop. Professional removal with steam and proper tools avoids all of these problems.

How do professionals remove window tint?

We use a combination of steam and controlled heat to soften the adhesive bond between the film and the glass. This allows the film to release cleanly in large pieces rather than tiny fragments. After the film is off, we use automotive-grade adhesive removers and non-abrasive scraping tools to dissolve the remaining glue. The glass gets a final polish to remove any haze. On rear windows with defroster lines, we work parallel to the lines — never across them — to avoid any damage.

Steamer removing old window tint film from a truck window

Should I get new tint applied after removal?

Most customers choose to have new tint applied the same day. Once the old film is off and the glass is prepped, it’s actually the ideal time for fresh installation — the glass is already clean, and we can apply new film immediately. If you’re upgrading from old dyed film to ceramic, you’ll notice a massive difference in heat rejection and clarity. We offer a discount on new tint when bundled with removal service.

Tint Removal Pricing

Side Windows Only

$75

2 front + 2 rear sides
Steam removal + adhesive clean
~1 hour

MOST POPULAR

Full Vehicle Removal

$150

All windows including rear
Defroster-safe technique
~2 hours

Removal + New Tint

Save $50

Bundle removal with new ceramic
Same-day turnaround
~3.5 hours total

What Customers Say

★★★★★

“My old tint was bubbling and purple on every window. I tried removing it myself and gave up after one window — the adhesive was impossible. They had the whole car stripped and re-tinted in one afternoon. Glass looks brand new.”

— Marcus T., Mauldin

★★★★★

“I was worried about my rear defroster lines — the last shop I called said they couldn’t guarantee them. These guys steamed everything off without a single broken line. Defroster works perfectly. Really impressed with the care they took.”

— Diane L., Simpsonville

★★★★★

“Bought a used car off Augusta Road with terrible tint. They removed it and put on XPEL ceramic the same day. Saved me $50 on the bundle deal. The difference between the old dyed film and new ceramic is night and day.”

— Tyler R., Greenville

Tint Removal FAQ

How long does tint removal take?
Side windows take about 15–20 minutes each. The rear window takes longer — 30–45 minutes — because of the defroster lines and the larger surface area. A full vehicle removal (all windows) typically takes 1.5–2.5 hours. Severely degraded film with baked-on adhesive can take longer. We don’t rush the process because that’s how glass gets scratched.
Will removal damage my rear defroster?
Not when done properly. We use steam to soften the adhesive so the film releases without pulling on the defroster lines. Our scraping technique works parallel to the lines, never across them. In thousands of removals, we maintain a near-perfect record on defroster preservation. If a line is already damaged before we start, we’ll point it out beforehand.
Can you remove tint from just one window?
Yes — we charge per window for partial removals. This is common when someone needs to replace a single window’s tint due to damage, or when a customer wants to remove only the front windows to meet legal requirements in another state. Single-window removal starts at $25.
My tint was installed last week and I don’t like it — can you remove it?
Fresh tint (under 30 days) is actually easier to remove than old, degraded film because the adhesive hasn’t fully cured. If you had the tint installed by us and aren’t happy with the shade, we’ll swap it for a different darkness level — you only pay the difference in film cost, not a full reinstall. If it was installed elsewhere, standard removal pricing applies.

Get Rid of Old, Ugly Tint

Professional removal that protects your glass and defroster lines. Bundle with new ceramic tint and save $50.